Winnerwell Flashing Kit

SKU: 910311
Vorige Item 19 of 57 Volgende
€ 46,00 (including 21% VAT)

Winnerwell Flashing Kit

Designed to fit perfectly with both the 2.5” Double Wall Pipe Section and 3.5” Double Wall Pipe Section, the Winnerwell Flashing Kit is made from silicone which resists high temperatures and is held in place by stainless steel rings with six wing nuts. This Flashing Kit can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.  

  • Please note that the flashing kit can only be used with the double wall Pipe 2.1-2.5 or 3.5 inch. If you use the flashing kit without the double wall pipe, the silicone will get too hot and there is a risk of fire!
  • Make sure to leave about 1.5m (or 4.5 feet) of flue pipe in between the stove and the flashing installed in the canvas of your tent.

 

Features/Specs

  • Compatible with Small/Medium/Large Double wall Pipe  Section
  • Made with silicone to resist high temperatures, creates a tight seal around the pipe, and provides flexibility
  • Inner diameter: 4.7 inches Outer Diameter: 8.7” inches
  • Stainless steel rings and 6 wing nuts hold the Flashing Kit in place
  • Use with existing stove jacks or when installing a stove jack in a tent or shelter
© 2019 - 2021 Winnerwell | sitemap | rss | ecommerce software - powered by MyOnlineStore