Winnerwell Flashing Kit Large
SKU: 910452
Winnerwell Flashing Kit Large
Designed to fit perfectly with the Winnerwell Triple Wall Heat Protector | L-Sized, the Winnerwell® Flashing Kit Large is made from silicone which resists the temperature of 240℃ and is held in place by stainless steel rings with six wing nuts. This Flashing Kit Large can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.
Make sure that you have at least 1.20 - 1.50 meters of pipe section/triple between the stove and this flashing kit. Otherwise it will get too hot and you risk melting the slicone!
When flashing kit is installed, but the stove is not in use, you can cover the flashing kit with the specially designed Winnerwell Rainproof Plate Large. Water, snow and debris no longer get through. Easily installed by the same wing nuts your flashing kit is installed with.
Specifications
- Material: Silicone collar + AISI304 Stainless Steel rings
- Inner Diameter: 150mm / 5.9in
- Outer Diameter: 260mm / 10.2in
- Height: 112mm / 4.4in
- Net Weight: 0.6kg / 1.3lbs
Winnerwell Flashing Kit must be installed at the position below the 5th row of the holes of the Winnerwell Heat Protector Chimney. If there’s an installation angle, please must make sure that any position of the Silicone part of the Winnerwell Flashing Kit must below the 5th row of these holes as well. We recommend to purchase Winnerwell® Short Pipes separately for height adjustment to meet the above specified position requirement.
Warning 1: The Flashing Kit must be used with Triple Wall Heat Protector | L-Sized, otherwise there is a risk of melting or even fire!
Warning 2: Temperature at the top part of the Heat Protector Chimney is high, the Silicone part must avoid the position of the upper cooling holes.
